Electrical resistance coating thickness tester
RST-231
NEW
Electrical resistance coating thickness tester
SPECIAL FEATURES
- A 4-probe probe (Kelvin type) is used, so double-sided boards and multilayer boards canbe measured with high accuracy without being affected by the back surface or internallayers.
Electrical - I use a computer. The screen is large, bright and easy to see.
- Easy to calibrate and measure. Two types of ranges can be selected, and metal filmsfrom 2 to 120 μm can be measured.
- Since up to 40 channels can be registered, channels can be managed by registering themseparately by user name, part number, etc.
- Measured data can be saved for each channel, and statistical items can be set formeasured data later for statistical processing.
- By setting the upper and lower limits of the film thickness, an abnormal value will be notified.
SPECIFICATION
Measurement principle:
4-probe electric resistance type
Measurement range:
2 to 24 μm, 10 to 120 μm
Number of channels:
40 channels
Data capacity:
100,000 data
Display:
Depends on PC monitor screen
Statistical processing:
maximum value, minimum value, average value, standard deviation,
average value, standard deviation, Histogram, upper and lower limit setting
average value, standard deviation, Histogram, upper and lower limit setting
Power supply:
AC100-240V、50/60Hz、10VA
Weight:
3.0kg（body）
Dimensions:
280(W)×230(D)×88(H)(body)
catalog
Metal films on insulators (copper foil, plating of printed circuit boards, etc.) can bemeasured in a short time (0.7 seconds) with high accuracy.